2025 Vermeer® Trailed Mowers TM1200
- Year 2025
- Make Vermeer®
- Model Trailed Mowers
2025 Vermeer® Trailed Mowers TM1200
TM1200 highlights- Wide cutting width, narrow transport width
- Complete, consistent cutting action
- Minimized, convenient maintenance
Features may include:
Maximized productivity- Cutter bars are staggered and overlap for complete cutting action down the middle.
- Help reduce labor and fuel by using one wide swath mower to cut more acres than multiple 3-point mowers.
- Help protect your cutter bar and your field. The suspension system complements the independent cutter bars, allowing each to contour the ground and operate at different levels.
- Float over fields and contoured terrain with a nitrogen-charged accumulator flotation system that adjusts for varying field and crop conditions.
- Get more protection from unseen obstacles with the wide skid shoes and suspension system that help protect the cutter bars and the friction clutch, which protects the drive system.
- Minimize maintenance with 12 self-contained discs, each with their own set of gears, bearings and lubricants. Gears stay in the grease — even when mowing at extreme angles.
- Gain easy access to the cutter bars with flip-up curtains.
- Replace blades in seconds using the exclusive Quick-Clip® blade retention system.
PTO
							PTO Power, Rated Engine Speed
							Recommended: 85 hp | Drive: 540 or 1000 rpm
						
						Drivetrain
							Driveline
							Torque Protection: friction disc clutch
						
						Suspension
							Suspension
							Hydraulic
						
						Wheels & Tires
							Tires, Rear Specification
							31x13.5-15
						
						Operational
							Operating Speed
							Disc: 2950 rpm
						
						Hydraulics
							Hydraulic Type
							2 double-acting
						
						
							Hydraulic Flow
							Rate: 6 gpm
						
						
							Maximum Pressure
							1500 psi
						
						Chassis
							Hitch/Type
							2-point with swivel gearbox, category II or III N
						
						Dimensions
							Dimensions
							Mower swung out offset: 50 in | Disc Diameter: 19.7 in
						
						
							Transport Height
							78 in
						
						
							Transport Width
							8.5 ft
						
						
							Transport Length
							22 ft
						
						
							Cutting Width
							15.5 ft
						
						
							Height
							Working: 78 in | Cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
						
						
							Length
							Working: 18 ft
						
						
							Width, Working Position
							22 ft
						
						Weights
							Weight
							Total: 5900 lbs | Tongue: 1580 lbs
						
						Features
							Features
							Number of Blades: 24 | Number of Discs: 12
						
						
							Adjustability
							Angle: Hydraulic pitch control
						
						
							Construction Material
							Curtain: 1400 g/m2 polyester woven material with flexible PVC covering
						
						Warranty
							Warranty
							3-year limited cutter bar
						
					 
			