2024 Arcusin ForStack FRS 8

2024 Arcusin ForStack FRS 8

The ForStack is a lightweight, high-speed accumulator that can stack up to five bales vertically and drop them in the field, keeping up with two or three balers with ease. This machine was designed to be compatible to all square bale sizes, offering also the possibility to accumulate small bale bundles.

Works on the same line of the baler

Dependent on baled product & field conditions

Collects bales in places with difficult acces

Comfortable and easy to operate

No big tractor required

Accumulating & disperse

Labor cost reduction and fuel savings

No previous experience required

Features may include:

Full control over the working cycle and performance visibility throughout the entire accumulation process. Permanent information inputs from the machine sensors and constant monitoring with warning and safety locking devices.

It is mounted on the moveable lance and its function is to assure that the bales are guided correctly into the accumulator

Heavy-duty claws designed to grab all bale sizes & weights. They are located in the lower part near the ground, holding the bales tightly until the loading area is reached.

Responsible for raising the collected bale to make room for the next one. The retaining mechanism is located in the upper part of the lift in order to stabilise the top bale while the machine is running.

Aligns the bales inside the accumulator and guides the accumulated stack out when unloading.

2 crossbars can be used for the two accumulator versions;

Version 8, for jobs with 80cm bales. (width)

Version 12, for jobs with 120cm bales. (width)

The power is fully hydraulic and independent from the tractor.It has its own high-capacity variable flow pump. It has electrically controlled hydraulic distribution. There is a total control of the operating speeds and pressures for all of the ForStack’s movements.

Alternative of manual control of operations using the levers on the hydraulic block.